Appearance: Translucent Bluish To Yellowish Liquid
Ionic Character: Weakly Cationic
pH-Value (as such): 4.5 - 5.5
Stabilities: DEXTER B SOFT 800 is stable with anionic, cationic & non-ionic finishing agents.
Storage: DEXTER B SOFT 800is stable under normal conditions. The product should be away from direct sunlight & protect from heat.
Properties
Soft, slippery & bouncy hand feel
High dimensional recovery in cotton based fabrics & hosiery garments.
Improvement of the sewability, tear strength and abrasion.
It is suited for finishing cotton , polyester ,wool, acrylics, nylon & blends
Shear stable , Non yellowing & non sticky.
Application
Dilution
DEXTER B SOFT 800can be diluted with cold water to any concentration & very easily dilutable. Application Fields
DEXTER B SOFT 800is used at room temperature in the padding and
exhaust process. It is an excellently suited for finishing wovens and knits made of cellulose fibres, wool and
synthetic fibres & their blends.
Dose Recommended
Exhaust Process: 1.0 - 4.0 % DEXTER B SOFT 800
pH: approx. : 5.0
Liquor ratio: 1:7 or 1:8 or 1:10
Drying: as usual
Padding Process: 10.0 - 40.0 g/l DEXTER B SOFT 800
pH: approx. : 5.0
Liquor pick-up: approx. 75-80 %
Drying: as usual
Information concerning the safety regulations can be taken from the Material Safety Data Sheet of this product. Our department for applied technique is always at your service for further information and advice.
Our technical advice and recommendations given verbally, in writing or by trials are believed to be correct. They are neither binding with regard to possible rights of third parties nor do they exempt you from your task of examining the suitability of our products for the intended use. We cannot accept any responsibility for application and processing methods which are beyond our control.